Features and Benefits • Accurate and consistent torque setting ensuring reliable and repeatable torque overload protection. • Instant and complete disengagement of the driving and driven inertias ensuring optimum protection. • Trip torque can be adjusted easily without removing the modules from the Torque Limiter. • Vernier scales are provided on each module allowing for accurate setting of the modules. • In the event of an overload, standard limit switches or proximity sensors can provide automatic motor shutdown. • The module can be quickly and easily reset. Manual or automatic resets are available. • Manual disengagement allows for the unit to be disconnected for maintenance purposes. • Integral grease fitting allows for periodic lubrication of the unit without removing it from the drive line. • Wide range of mounting configurations ensures the right solution for any problem. • Drop-out centre section allows the Torque Limiter to be removed from the drive line without moving the equipment. Manual disengagement nut (6) can be used to disengage the module, without affecting the torque setting. By simply rotating the sleeve back to its original position and hitting the reset pin with a soft hammer, the unit is once again fully operational. The vernier allows for accurate and consistent adjustment of each module. The specifications contained within this page are correct at the time of going to print. British Autogard are continually reviewing and updating the specifications on all its product range and therefore reserve the right to change any detail